JConcepts Alloy Steering, Alloy Wing Mounts and Battery Hold Down

JConcepts has the steering system on the B4.1, T4.1 and SC10 covered with an all-new lightweight, aluminium steering bellcrank assembly. Their servo saver-less aluminium steering system is CNC-machined and replaces the stock plastic bellcrank and comes in a blue anodised finish. The aluminium, lightweight assembly provides a more rigid steering system with increased steering feel and response. The fit of the new bellcranks has been improved by the positioning of the bearings to help eliminate binding when assembled.

#2158  JConcepts B4.1/T4.1/SC10 Aluminium Steering Bellcranks

The rear wing/body mount on the rear of the B4.1 and T4.1 vehicle line-up is under a serious load during crashes and inevitable direct landings so JConcepts has beefed up the wing/body mount area with the introduction of the aluminium mounts specifically designed for the B4.1 and T4.1 line of vehicles. CNC-machined from aluminium, these are available in blue and black and are a direct bolt-on part to the popular duo of AE vehicles.

#2159-1  JConcepts B4.1/T4.1 Aluminium Wing/Body Mounts – blue
#2159-2  JConcepts B4.1/T4.1 Aluminium Wing/Body Mounts – black

Securely holding down the battery brace is crucial and with these new hold downs from JConcepts, routine maintenance or battery changes is now easier and more secure than ever. Starting with an alignment friendly cone shape that eases the nut into position, the nut has a larger flange, which perfectly matches the proportions of the “Monroe” battery brace and a hex shape that allows a user to use either an 11/32” nut driver or the conventional hand-tightening method. The nut is finished off with a closed-end design, which features an etched JC logo for authenticity and brand loyalty.

#2160-1  JConcepts Battery Hold Down Thumb/Wrench Nut – blue (4)
#2160-2  JConcepts Battery Hold Down Thumb/Wrench Nut – black (4)

Source: JConcepts