X Factory Ellis Stafford Edition – X6 Squared
X Factory is proud to announce a special “Ellis Stafford†Championship Edition. The X – 62 Conversion Kit has been shipped to dealers in U.K and France. This limited edition kit celebrates Ellis fantastic back-to-back BRCA 2WD National championship titles and TQ at the 2009 Euros.
Now customers have the chance to buy the car that closely represents that which Ellis uses with all the optional tuning and cosmetic parts found on the champions buggy; however only one limited run batch of 50 of these special kits has been produced, so customers must act quickly before they are gone.
The buggy brings together all the standard features of the X6 Squared that have made the car so successful all over the world, including the mid motored concept, four gear transmission, LiPo friendly one piece chassis design and many more unique features too. X Factory have added components from no less than nine outside manufacturers to bring you this kit, the full list of additional parts over and above the standard K019 X6 Squared Conversion are as follows;
- E-Speed – ES001 Blue alloy rear camber links
- E-Speed – ES002 Blue alloy motor plate brace
- Dirtz Dialled Partz – DDP024 Blue alloy lightweight milled motor plate
- Dirtz Dialled Partz – DDP025 Precision alloy suspension shims (2 sets)
- Rudebits – Complete Brass Weight Distribution kit
- X-Factory – XF1006 Plastic Chassis replaces graphite
- X-Factory – XF1225 Quick Change LIPO battery retainer kit
- X-Factory/MIP – XF2601 Steel trailing front wheel axles
- X-Factory/MIP – XF5661 Extra Droop long rear CVD axles and spacers
- Lunsford – complete set Titanium turnbuckles (6)
- Lunsford – complete set Titanium broached ball studs (14)
- Losi – A6016 Heavy Duty grey ballcups
- J Concepts – JC0103 Front air dam/wing
- Associated – AS9593 30 Degree front castor blocks
- Ellis Spec – Wing mounts and AE Blue flanged washers for wing
- Ellis Spec – roll bar mounting kit featuring a special slotted rear bulkhead,
- Titanium 1†sway bar links, ball joints and HD ballends
- Decal Designs – Special Edition Ellis Spec decal sheet
The kit also includes a special addendum to the instruction manual written by Ellis himself! Step-by-step, Ellis shows you the slight changes that produce Championships. Purchased separately these option parts would cost over £300 and you still would need the Conversion Kit!
The kits have already been shipped from the factory in the USA and are expected to arrive on December 24th, each kit has been hand signed with the kit number and autographed by Ellis too!
XFK020 – Ellis Stafford Championship Edition X62 Conversion Kit UK RRP £334.99
Available to order now at all good X-Factory UK stockists (only available while stocks last).
Source: X-Factory UK
