Team Associated RC10T4.1 Factory Team Kit
Seven-Time R.O.A.R. National Champion!
Since its release in 2003, the RC10T4 remains undefeated on a national level, having won seven consecutive ROAR National Championships. Driven by this continuing success, Team Associated designers in Area 51 spent countless hours refining the T4 to meet the demands of today’s LiPo batteries and brushless motors. The RC10T4.1 Factory Team kit is the product of all this effort.
The T4.1 Factory Team kit comes armed with Factory Team aluminium rear hubs, V2 slipper, Hi-Flow T4 body, and optimised suspension setup to help you quickly master any track!
 |
 |
RC10T4.1 Factory Team Kit Features
- Factory Team 0.5 degree aluminium rear hubs with oversized outer bearing
- Ball differential with light-weight outdrives
- Factory Team V2 hard-anodised threaded shock bodies with bleed-screw caps
- V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
- JConcepts Hi-Flow T4 body
- JConcepts Double-Dees rear tyres in green compound and Carvers front tyres in blue compound
- CVA joints with pin retainer clips
- Carbon fibre battery strap with blue aluminium thumb screws
- Blue titanium turnbuckles
- Optimised suspension setup for use with LiPo batteries
- Suspension mounts for 4°, 3.5°, 3° and 2.5° rear toe included
- Complete set of precision ball bearings
- Factory Team blue aluminium hinge pin brace, milled motor plate, servo mounts… and much more!
 |
 |
Specification
- Scale: 1:10
- Power: Electric
- Length: 390mm
- Width: 316mm
- Weight: 1756g*
- Wheelbase: 288mm
- Internal Gear Ratio: 2.6:1
- Drive: 2WD
- * Actual running weight will vary depending on parts installed.
 |
 |
RC10T4.1 Factory Team Kit shown equipped with items NOT included in kit; Reedy battery, pinion gear, LRP ESC, LRP motor, XP servo and XP receiver. Body comes clear. Assembly and painting required. Tyres require gluing.
- #7023 RC10T4.1 Factory Team Kit MSRP: $409.99
- Available August 2010
Source: Team Associated
