New RC Lights LED Controller Released – 14 LED Turnbrake

rclights15054b

rclights25054a rclights35014a

CONTROLLER ONLY

RCL5054 – 14 LED Controller – TURNBRAKE

 

CAR & TRUCK 5MM SYSTEM

RCL5014 – Head, Turn & Electronic Brake Lights [5MM, 14″]

TURNBRAKE 14 LED CONTROLLER

Directly power up to 14 LEDs. Current limiting resistors are built right in.

Using the TURNBRAKE 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX using the included RX Pass-Thru (mini Y-harness). A second RX Pass-Thru is included for linking with the RX steering channel.

Dual intensity brake light action is built right in! Throttle channel input fully reversible.

Fully-adjustable rate turn signals for Right and Left turn indication. Steering channel input fully reversible.

LEDs are split into seven banks: 2 constant fog; 4 constant/strobing headlights (headlight strobe rate fully-adjustable); 4 adjustable rate turn signals (2 each side R & L; front and back); and 4 switched dim or full bright depending on throttle stick position (GAS or BRAKE.)

Throttle and steering centre-stick auto-detect for precise lighting effects every time.

Full-feature functionality built right in: constant fog lights, strobing headlights, active turn signals, and dual intensity brake lights for the ultimate in scale lighting effects for any scale body.

Bundled with this complete system: #5014

#5014: Is a universal LED system that can be installed in any 1:12 to 1:8 size Radio Control Car or Truck with accessible steering servo and throttle servo or ESC plug.  Everything needed for a complete installation is included with every system. 4 white headlights, 2 white fog lights, 4 amber adjustable rate turn signals, and 4 red dual-intensity electronic brake lights are all included.

ALL LEDS ARE BACKED BY A LIFETIME WARRANTY

  • RCL5054        TURNBRAKE 14 LED CONTROLLER
  • RCL5014        HEAD, TAIL & ELECTRONIC BRAKE LIGHTS [5MM, 14″]

 

Source: RC Lights

 

 

Share →

Leave a Reply

Your email address will not be published. Required fields are marked *